Monday, September 21, 2009

How to change your motor oil

  1. Follow your owner's manual for proper directions in changing your motor oil.
  2. Before removing the drain plug on the bottom of the engine's oil pan make sure that you have a clean drain pan that will accommodate all the oil in your vehicle. For a standard passenger vehicle this is generally no more than 5 quarts. Drain the used oil into a drip pan and make sure you have rags available to clean up any drips or spills.
  3. At this point, change your oil filter taking care not to spill the oil that is in the filter. Again, make sure the drip pan is under the filter to catch any drainage. Properly drain the filter of all excess oil.
  4. Replace the drain plug and securely tighten according to the manufacturers' instructions.
  5. Using a funnel, add new engine oil allowing each container to fully drain. Be careful not to spill the oil. Have rags available to mop up any spills on the engine block or the ground. Do not overfill. Consult your owner's manual for the correct grade and amount of motor oil needed for your particular vehicle. Most cars generally will need four to five quarts of oil.
  6. Once you have filled the engine with oil according to the manufacturers' specification, be sure to check around the oil filter and drain plug for any evidence of leaking oil. Oil spilled or leaked on your driveway, on streets or other surfaces will inevitably be washed into storm drains or into adjoining soils during heavy precipitation periods, which can contaminate lakes, rivers, streams or groundwater.
  7. Using the funnel, pour the used oil from the drip pan into a proper recycling container. There are numerous drain pans on the market that serve as both a drain pan and holding container for recycling. Visit your nearest auto parts store to find these specialized containers for changing and recycling used oil. Once in a sealed container take the oil to a local motor oil collection center for recycling. Do not mix other lubricants (such as brake fluid or transmission fluid) or any other materials with the used motor oil. Most recycling locations will not accept it if you do.